3M United States3M Collision

3M™ Accuspray™ Spray Gun Model HG18, 16570

  • Part Number: 16570
  • UPC: 00051131165700
  • Stock Number: 60455064125
The HG18 trigger is wider so it is more comfortable. We have shortened the reach to make the pull easier. An improved air valve gives users more precise control. Plus, we've added a reinforcing washer to the air fitting to prevent over tightening from damaging the gun body. And speaking of the gun body, there is now more internal reinforcement — so it can survive accidental abuse. We've even added a gray body panel, so technicians can easily spot their primer gun.

Get the finish of a premium HVLP primer gun at a fraction of the cost. Designed for those who demand the best and won’t settle for less. Used with the 3M™ PPS™ Paint Preparation System, the Accuspray system reduces clean up time while increasing productivity.
Click to Chat
Chat Only Available in English

Product Video

View Larger
  • Product Description

    Thanks to the unique replaceable atomizing head of the 3M™ Accuspray™ Spray Gun it’s like having a brand new HVLP primer spray gun every time you use it.

    • Lightweight and comfortable to use
    • Easy and quick to clean - reduces solvent use which saves money and waste.
    • Lowers overspray, which reduces primer consumption because less paint is wasted.
    • Provides excellent atomization which gives a smooth, flat finish that decreases sanding time.

  • Additional Product Information

    3M Part Number 16570
    UPC 00051131165700
    Case Quantity 1 kit per case
    Case Inner Pack 1 kit

Reviews

Add Your Review

Submitted on 10/30/12  |  By Bigc

It would be great to have a 1.3-1.4 tip for basic single stage jobs. I do a lot of fleet stuff (and refuse to use a pressure pot) with just a white single stage and this would be perfect. Also for sealers etc. that you dont want to have to run through your expensive guns.

Submitted on 8/15/12  |  By raymond savard

I would like to have 1.4 as atomizing head.

Submitted on 5/20/12  |  By Steele Auto Body & Lube Center

I've used many different primer guns and never knew a primer gun could have so little over-spray and still atomize the primer correctly. I had a full house in the shop and was able to prime a 1'x2' spot without having any worries about getting over-spray on the freshly painted hood 3 feet away. It's incredibly easy to clean and you get a lot of use out of the heads. The cost of the replacement heads versus time cleaning, disassembling a conventional gun, & extra time (needed with typical primer guns) taping off the area is WELL worth it! Not too mention, that for smaller areas, you have to love the 3 oz cups for being 6H compliant.

Submitted on 7/11/11  |  By Maaco Vancouver

We have been using 3 of these guns for about 3 months. This is another incredible product from 3M. VERY little over-spray and incredible transfer efficiency. 6H compliant with the 3 oz. cup. Replacement heads last about 3mos. of hard use. It is the only primer gun allowed in our shop - it is that good!

Submitted on 3/25/11  |  By Joe Voyles

pretty cool that you've come up with a way to cut out all of the down time and erroring in primering now you have to expand it too full painting jobs and stuff. i hear about more and more house painters using spra units inside the house latex low misting acuspray would be killer

Submitted on 3/23/11  |  By RON HMS PROPERTY MAINTENANCE

I WAS ABLE TO ATTEND THE DEMO FOR DUNN EDWARDS PAINT NOT TO LONG AGO AND WAS TRULY AMAIZED AT THE PRODUCT. I LOVE MY TITAN CAPSPRAY 105 BUT HATE CLEAN-UP THIS GUN IS MY NEXT BUY. BEST FEATURE BESIDES EASY CLEANUP IS THE ABILITY TO USE IN ANY POSITION E.G. UP SIDE DOWN AND SIDEWAYS

Submitted on 2/14/11  |  By David

This system is awesome!

Write Your Own Review

You're reviewing: 3M™ Accuspray™ Spray Gun Model HG18, 16570

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars
Rating
Close Lightbox